Supermicro SuperServer SYS-1029U-TN12RV User Manual page 91

Chapter 6: UEFI BIOS
Intel® VMD for Volume Management Device on CPU1

VMD Config for PStack0
Intel® VMD for Volume Management Device
Select Enable to use the Intel® Volume Management Device Technology for this
stack. The options are Disable and Enable.
*If the feature, Intel® VMD for Volume Management Device, is set to Enable,
the following features will become available for user's configuration:
P1_NVMe0 VMD (Available when the device is detected by the system)
Select Enable to use the Intel® Volume Management Device Technology for this
device. The options are Disable and Enable.
P1_NVMe1 VMD (Available when the device is detected by the system)
Select Enable to use the Intel® Volume Management Device Technology for this
device. The options are Disable and Enable.
Hot Plug Capable (Available when the device is detected by the system)
Use this feature to enable the hot plug support for PCIe root ports 1A~1D. The op-
tions are Disable and Enable.
VMD Config for PStack1
Intel® VMD for Volume Management Device
Select Enable to use the Intel® Volume Management Device Technology for this
stack. The options are Disable and Enable.
*If the feature, Intel® VMD for Volume Management Device, is set to Enable,
the following features will become available for user's configuration:
AOC-URN4-m2TS NVME0 VMD (Available when the device is detected by the
system)
Select Enable to use the Intel® Volume Management Device Technology for this
device. The options are Disable and Enable.
AOC-URN4-m2TS NVME1 VMD (Available when the device is detected by the
system)
Select Enable to use the Intel® Volume Management Device Technology for this
device. The options are Disable and Enable.
91