Supermicro SuperServer SYS-1029U-TN12RV User Manual page 100

SuperServer 1029U-TN12RV User's Manual
Select Disabled to deactivate the selected slot, Legacy to activate the slot in legacy mode,
and EFI to activate the slot in EFI mode. The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Select an option to enable Option ROM support to boot the computer using a device specified
by the user. The options are Legacy and EFI.
Onboard LAN1 Option ROM
Onboard LAN2 Option ROM
Use the above two features to select the type of device installed in a LAN port specified by
the user for system boot. The default setting for Onboard LAN1 Option ROM is PXE, and the
default setting for Onboard LAN2 Option ROM is Disabled.
Onboard NVMe1 Option ROM
Onboard NVMe2 Option ROM
Onboard NVMe3 Option ROM
Onboard NVMe4 Option ROM
AOC-URN4-m2TS NVMe0 OPROM (Available when the device is detected by the
system)
AOC-URN4-m2TS NVMe1 OPROM (Available when the device is detected by the
system)
AOC-URN4-m2TS NVMe2 OPROM (Available when the device is detected by the
system)
AOC-URN4-m2TS NVMe3 OPROM (Available when the device is detected by the
system)
Use the above features to select the type of the device installed on an NVMe port specified
by the user for system boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Select Legacy to boot the system using a legacy video device installed on the motherboard.
The options are Disabled, Legacy, and EFI.
Network Stack Configuration

Network Stack
Select Enabled to enable UEFI (Unified Extensible Firmware Interface) for network stack
support. The options are Disabled and Enabled.
*If the feature "Network Stack" is set to Enabled, the following features will
become available for user's configuration:
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE boot support. The options are Disabled and Enabled.
100