Supermicro SuperServer SYS-1029U-TN12RV User Manual page 57

I-SATA 3.0 and S-SATA 3.0 Ports
The X11DPU-V has eight I-SATA 3.0 ports (I-SATA0-3, I-SATA4-7) which are supported by
the Intel® C621 chipset. In addition, it also has six S-SATA 3.0 ports (S-SATA0-3, S-SATA4/
S-SATA5) that are supported by the Intel® SCU. S-SATA4/S-SATA5 can be used with
Supermicro SuperDOMs which are yellow SATA DOM connectors with power pins built in,
and do not require external power cables. Supermicro SuperDOMs are backward-compatible
with regular SATA HDDs or SATA DOMs that need external power cables.
RAID Key Header
A H/W RAID key is required to install on this RAID Key header for supporting RAID settings
for NVMe connections. Please contact Supermicro at
H/W RAID key for this header.
Front VGA Port
One VGA port is located at JVGA2 on the motherboard. This VGA port provides front
accessible video display.
Internal Speaker/Buzzer
The Internal Speaker/Buzzer (SP1) is used to provide audible indications for various beep
codes. See the table below for pin definitions.
SATA 3.0 Port
Pin Definitions
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
RAID Key Header
Pin Definitions
Pin# Definition
1 Ground
2 RAID_KEY_PU
3 Ground
4 PCH_RAID_KEY
Internal Buzzer
Pin Definitions
Pin# Definition
1 Pos (+) Beep In
2 Neg (-) Alarm Speaker
57
Chapter 4: Motherboard Connections
www.supermicro.com to purchase the