RIGOL
Press CS and rotate the multifunction knob
➢
channel, and then press down the knob to select it. You can also press
CS continuously or enable the touch screen to select it. The analog
channel (CH1-CH4) and digital channel (D0-D15) can all be selected as
the CS channel.
Press CS Polarity continuously to select
➢
When you select the analog channel (CH1-CH4) as the CS channel,
➢
press Threshold, then rotate the multifunction knob
pop-up numeric keypad to set the threshold.
4. Source setting
Press Sources to enter the source setting menu.
CLK setting
⚫
Press CLK and rotate the multifunction knob
➢
source of the clock channel, and then press down the knob to select it.
You can also press CLK continuously or enable the touch screen to
select it. The analog channel (CH1-CH4) and digital channel (D0-D15)
can all be selected.
When you select the analog channel (CH1-CH4), press Threshold
➢
below the CLK menu, then rotate the multifunction knob
the pop-up numeric keypad to set the threshold of the clock channel.
Press Slope continuously to set the instrument to sample MISO and
➢
MOSI on the rising edge (
MISO and MOSI setting
⚫
Press MISO and rotate the multifunction knob
➢
desired MISO data channel, and then press down the knob to select it.
You can also press MISO continuously or enable the touch screen to
select it. The available channels include OFF, analog channels
(CH1-CH4), and digital channels (D0-D15). When you select an analog
channel (CH1-CH4), press Threshold below the MISO menu, then
rotate the multifunction knob
set the threshold of the MISO data channel.
Press MOSI and rotate the multifunction knob
➢
desired MOSI data channel, and then press down the knob to select it.
You can also press MOSI continuously or enable the touch screen to
select it. The available channels include OFF, analog channels
(CH1-CH4), and digital channels (D0-D15). When you select an analog
channel (CH1-CH4), press Threshold below the MOSI menu, then
rotate the multifunction knob
set the threshold of the MOSI data channel.
Note:
the same time.
11-20
(Negative) as the polarity for CS channel.
MISO and MOSI source channels cannot be both set to "OFF" at
Chapter 11 Protocol Decoding
) or falling edge (
or use the pop-up numeric keypad to
or use the pop-up numeric keypad to
MSO7000/DS7000 User Guide
to select the desired
(Positive) or
or use the
to select the desired
or use
) of the clock signal.
to select the
to select the