Rigol MSO7000 Series User Manual page 245

Chapter 11 Protocol Decoding
6. Interpret the decoded LIN data
Break (Sync Break): expressed in Hex, displayed as a pink patch.
⚫
SYNC (Sync): expressed in Hex, displayed in dark yellow-green.
⚫
ID (Frame ID): expressed in Hex, displayed in yellow-green.
⚫
Data (Data): its display format is the same as that of the bus data (Hex, Dec,
⚫
Bin, or ASCII), displayed as a black patch.
CRC (Cyclic Redundancy Check): expressed in Hex, displayed in light
⚫
yellow-green. When errors occur, it is displayed as a red patch.
Break
Wakeup (wake up symbol): displayed as a tangerine patch.
⚫
7. Error expressions in decoding
In LIN decoding, the parity error, checksum error, or sync error may occur.
Parity Error
⚫
If the parity error is detected, frame ID and parity bit (when the signal is set
to include the parity bit) will be displayed in red, as shown in the figure
below.
MSO7000/DS7000 User Guide
Sync ID
Parity Error
Data CRC
RIGOL
11-27