Table of Contents
Advertisement
RIGOL
methods to connect the signal under test. For details, refer to
Probe User Guide
Note:
Before you connect the logic probe to the signal under test, connect logic
⚫
probe's adapter provided in the accessories to its corresponding channel group.
The digital channel input terminal does not support hot plugging. Please do not
⚫
insert or pull out the logic probe when the instrument is in power-on state.
1-8
.
Figure 1-9 To Connect the Logic Probe
Chapter 1 Quick Start
RPL2316 Logic
MSO7000/DS7000 User Guide
Advertisement
Table of Contents
