Rigol MSO7000 Series User Manual page 127

Chapter 5 To Trigger the Oscilloscope
setting methods are available for baud rate:
Press Baud Rate, then set the user-defined baud rate with the displayed
⚫
numeric keypad.
Press Baud Rate, then select the preset baud rate from the available options.
⚫
The available baud rates include 50 bps, 75 bps, 110 bps, 134 bps, 150 bps, 300
bps, and etc.
Press Baud Rate, then rotate the multifunction knob
⚫
rate at a small step.
Trigger Mode:
In the trigger control area (Trigger) on the front panel, press Mode to quickly switch
the current trigger mode. For details, refer to descriptions in "Trigger Mode".
Trigger Parameter Setting:
Set the trigger parameter (noise rejection) under this trigger type. For details, refer
to descriptions in "Noise Rejection".
Trigger LEVEL/Threshold Level:
Rotate the Trigger
to "Trigger LEVEL/Threshold Level". The current trigger level/threshold level
value is displayed at the upper-right corner of the screen.
MSO7000/DS7000 User Guide
LEVEL knob to adjust the trigger level/threshold level. Refer
RIGOL
to adjust the baud
5-35