Code 11 Set Length 2 - Datalogic QuickScan I QM2131 Product Reference Manual

Enter/Exit Programming Mode

Code 11 Set Length 2

This feature specifies one of the bar code lengths for
on page
page 194
Mode. Length includes the bar code's check and data characters.
The length can be set from 2 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
more detailed programming instructions.
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
196
194. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
$CC1L2
50 = Length 2 is 50 Characters
DEFAULT
Code 11 Length Control
Variable Length on
Fixed Length on page 194
"Set Length 2" on page 305 for
~
CANCEL
QuickScan™ I QM21X1 / QBT21X1
Code 11