Standard 2 Of 5 Set Length 2 - Datalogic QuickScan I QM2131 Product Reference Manual

Symbologies

Standard 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
Control on page
Length on page 203
page 203
The length can be set from 1 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
more detailed programming instructions.
Select Standard 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
203. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
Mode. Length includes the bar code's check and data characters.
$CS2L2
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
Standard 2 of 5 Length
Variable
Fixed Length on
"Set Length 2" on page 305 for
~
CANCEL
205