Datalogic QuickScan I QM2131 Product Reference Manual page 273

Enter/Exit Programming Mode
Send Batch
When the scanner is configured in Manual Batch Mode, use the following bar
code to initiate sending of labels stored in batch
NOTE
Erase Batch Memory
When the scanner is configured in Manual Batch Mode, use the following bar
code to erase any labels stored in batch memory.
NOTE
Product Reference Guide
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this barcode.
Erase Batch Memory
memory.
Send Batch
263