Plessey Set Length 2 - Datalogic QuickScan I QM2131 Product Reference Manual

Symbologies

Plessey Set Length 2

This feature specifies one of the barcode lengths for
page
302 Mode, or the second fixed length if in
Length includes the barcode's check, data, and full-ASCII shift characters. The
length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length).
Table 4
instructions on setting this feature.
Table 4. Plessey Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Plessey Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the beginning.
250
248. Length 2 is the maximum label length if in
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT PLESSEY LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
50 = Length 2 is 50 Characters
Plessey Length Control on
Variable Length on page
Fixed Length on page 302
page 303
EXAMPLES
07 Characters 15 Characters
'0' and '7' '1' and '5'
CANCEL
QuickScan™ I QM21X1 / QBT21X1
Mode.
for detailed
50 Characters
'5' AND '0'