Enter/Exit Programming Mode
UPC-E
The following options apply to the UPC-E symbology.
UPC-E Enable/Disable
When disabled, the reader will not read UPC-E bar codes.
$CEBEN01
UPC-E = Enable
UPC-E Check Character Transmission
Enable this option to transmit the check character along with UPC-E bar code
data.
$CEBCT01
UPC-E Check Character Transmission = Send
94
$CEBEN00
UPC-E = Disable
DEFAULT
$CEBCT00
UPC-E Check Character Transmission = Don't Send
DEFAULT
QuickScan™ I QM21X1 / QBT21X1
UPC-E