Table of Contents
Advertisement
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Focus
• Click
, then the lens focuses far and the distant object gets clear.
• Click
, then the lens focuses near and the nearby object gets clear.
PTZ Speed
• Slide
Iris
• When the image is too dark, click
• When the image is too bright, click
9.1.13 Conduct 3D Positioning
3D positioning is to relocate the selected area to the image center.
Steps
1. Click
to enable the function.
2. Select a target area in live image.
- Left click on a point on live image: the point is relocated to the center of the live image. With
no zooming in or out effect.
- Hold and drag the mouse to a lower right position to frame an area on the live: the framed
area is zoomed in and relocated to the center of the live image.
- Hold and drag the mouse to an upper left position to frame an area on the live: the framed
area is zoomed out and relocated to the center of the live image.
3. Click the button again to turn off the function.
9.1.14 De-icing
Click
to perform manual de-Icing of the device.
9.1.15 Synchronize FOV
Click
to synchronize the FOV of optical lens and thermal lens.
9.2 Set Transmission Parameters
The live view image may be displayed abnormally according to the network conditions. In different
network environments, you can adjust the transmission parameters to solve the problem.
Steps
1. Go to Configuration → Local .
to adjust the speed of the pan/tilt movement.
to enlarge the iris.
to stop down the iris.
48
Advertisement
Table of Contents
