Table of Contents
Advertisement
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Preset No.
40
41
42
43
44
45
46
47
8.3 Set Patrol Scan
Patrol scan is a function to automatically move among multiple presets.
Before You Start
Make sure that you have defined more than one presets. See Set Preset for detailed configuration.
Steps
1. Click to show the setting panel, and click
2. Select a patrol number from the list and click
3. Click
to add presets.
Preset
Select predefined preset.
Speed
Set the speed of moving from one preset to another.
Time
It is the duration staying on one patrol point.
Delete the presets in patrol.
Adjust the preset order.
Note
A patrol can be configured with 32 presets at most, and 2 presets at least.
4. Click OK to finish a patrol setting.
5. Repeat the steps above to configure multiple patrols.
6. Operate patrols.
Call the patrol.
Function
Night mode
Call pattern 1
Call pattern 2
Call pattern 3
Call pattern 4
One-touch patrol
Call area scan
Call area scan 1
Preset No.
98
99
100
101
102
103
104
105
to enter patrol setting interface.
.
37
Function
Start frame scan
Start auto scan
Start tilt scan
Start panorama scan
Call patrol 5
Call patrol 6
Call patrol 7
Call patrol 8
Advertisement
Table of Contents
