Table of Contents
Advertisement
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
10.2 Display Settings
It offers the parameter settings to adjust image features.
Go to Configuration → Image → Display Settings .
For device that supports multiple channels, display settings of each channel is required. The
settings for different channels may be different. This part introduces all possible parameters among
the channels.
Click Default to restore settings.
10.2.1 Scene Mode
There are several sets of image parameters predefined for different installation environments.
Select a scene according to the actual installation environment to speed up the display settings.
10.2.2 Image Adjustment
By adjusting the Brightness, Saturation, Contrast and Sharpness, the image can be best displayed.
10.2.3 Image Adjustment (Thermal Channel)
You can optimize the image display effect of thermal channel by setting background correction and
manual correction.
Background Correction
Fully cover the lens with an object of uniform temperature in front of the lens, such as foam
board or paperboard. When you click Correct, the device will take the uniform object as the
standard and optimize the image once.
Manual Correction
Click Correct to optimize the image once.
Note
It is a normal phenomenon that short video freezing might occur during the process of Background
Correction and Manual Correction.
Thermal AGC Mode
Choose the AGC mode according to different scenes to balance and improve the image quality.
56
Advertisement
Table of Contents
