Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
9.1.6 Light
Click
to turn on or turn off the illuminator.
9.1.7 Operate Wiper
For the device that has a wiper, you can control the wiper via web browser.
Steps
1. Go to wiper setting page: Configuration → PTZ → Wiper .
2. Select a wiper mode.
One
The wiper wipes one time when you click
Time
Cycle
The wiper works on schedule at set wiping interval. Click
wiping.
Duration
Interval
Auto
Auto mode is only available for device that supports rain-sensing auto wiper.
In auto mode, the wiper works when rain drops on the window.
9.1.8 Lens Initialization
Lens initialization is used on the device equipped with motorized lens. The function can reset lens
when long time zoom or focus results in blurred image. This function varies according to different
models.
Manual Lens Initialization
Click
to operate lens initialization.
Auto Lens Initialization
Go to Configuration → System → Maintenance → Lens Correction to enable this function. You
can set the arming schedule, and the device will correct lens automatically during the
configured time periods.
The schedule in which the wiper is ready to work.
The interval between two secessive wiping actions.
Note
on live view page.
46
on live view to start