Video Recording; Record Automatically - HIKVISION DS-2TD4137-25/W User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
1. Go to Configuration → Storage → Storage Management → Cloud Storage .
2. Check Enable Cloud Storage.
3. Set basic parameters.
Protocol Version
Server IP
Serve Port
User Name and
Password
Picture Storage
Pool ID
4. Click Test to test the configured settings.
5. Click Save.

11.2 Video Recording

This part introduces the operations of manual and scheduled recording, playback, and
downloading recorded files.

11.2.1 Record Automatically

This function can record video automatically during configured time periods.
Before You Start
Select Trigger Recording in event settings for each record type except Continuous. See Event and
Alarm for details.
Steps
1. Go to Configuration → Storage → Schedule Settings → Record Schedule .
2. Select channel No.
3. Check Enable.
4. Select a record type.
Note
The record type is vary according to different models.
Continuous
The video will be recorded continuously according to the schedule.
Motion
When motion detection is enabled and trigger recording is selected as linkage method,
object movement is recorded.
The protocol version of the cloud storage server.
The IP address of the cloud storage server. It supports IPv4 address.
The port of the cloud storage server. 6001 is the default port and you
are not recommended to edit it.
The user name and password of the cloud storage server.
The ID of the picture storage region in the cloud storage server. Make
sure storage pool ID and the storage region ID are the same.
67