Table of Contents
Advertisement
6
Technical description
6.1
Gear unit configuration
The devices of the AG2210 - LPxxx series are single- or multi-stage, low-backlash planetary gear units. They
can be used in any installation position. All gear units are manufactured in version "M" (motor mounting) as
standard. The design of the output shaft bearings ensures that high breakdown torques and axial forces can
be absorbed. The motor can be centered via the bearing socket (not via the adapter plate). This avoids radial
distortion of the motor. Various motors can be adapted via an adapter plate and spacer sleeve.
6.2
Overview of gear components LP
6.3
General technical data
The maximum permissible speeds and torques can be found in our catalog or on our web-
site at http://www.beckhoff.de.
Note
6.4
Transport, assembly and disassembly
No special mode of transport is prescribed for the gear unit.
AG2210
Gear components
A
Gear housing
B
Output shaft
C
Adapter plate
Version: 1.6
Technical description
15
Advertisement
Table of Contents
