Table of Contents
Advertisement
Technical description
6
Technical description
6.1
Design of the motors
The synchronous servomotors of the AM8100 series are brushless three-phase motors for demanding servo-
applications. In conjunction with our digital servo drives they are particularly suitable for positioning tasks in
industrial robots, machine tools, transfer lines etc. with demanding requirements in terms of dynamics and
stability.
The servo motors are equipped with permanent magnets in the rotor. This advanced neodymium magnetic
material makes a significant contribution to the motors' exceptional dynamic properties. A three-phase
winding is housed in the stator, and this is powered by the servo terminal. The motor has no brushes, the
commutation being implemented electronically in the servo terminal.
The motors are available with or without built-in holding brake. The brake cannot be retrofitted.
The motors have a matt dark grey powder coating (similar to RAL 7016).The finish is not resistant against
solvents (e.g. trichlorethylene, thinners or similar).
6.2
General technical data
Climate category
Ambient temperature
(at rated values)
Permissible humidity
(at rated values)
Power derating
(currents and torques)
Ball bearing service life
Technical data
Storage and transport data
6.2.1
Power derating
Ambient temperature
14
3K3 according to EN 60721
+5 - +40 °C for site altitudes up to 1000 m amsl
95% relative humidity, non-condensing
For site altitudes above 1000 m amsl and 40 °C
≥30.000 operating hours
→ see section --- FEHLENDER LINK ---
→ see section --- FEHLENDER LINK ---
f
T
t
A
Calculation of the power data when exceeding the
specified temperature limit > 40 °C up to 55 °C:
M
Version: 2.1
= Temperature utilisation factor
= Ambient temperature in °C
= M
x f
0_red
0
T
Synchronous servomotor
Advertisement
Table of Contents
