Mechanical Installation; Important Notes - Beckhoff AG2210 Manual

Mechanical installation

7 Mechanical installation
7.1

Important notes

Damage to persons and devices
Observe the general and special safety instructions.
CAUTION
The gear unit can be used in any gear unit.
Assembly sequence
Always follow the assembly sequence described below in order to avoid damage.
Attention
The fastening screws are not included and must be provided by the customer. Pertinent information can be
found in the individual assembly steps.
Compressed air may damage gear unit seals.
Do not use compressed air for cleaning the gear unit.
Attention
In rare cases, leaks ("sweating") may occur at the drive in gear units with
grease lubrication (see name plate).
• To avoid "sweating", we recommend sealing the areas between
Attention
ð adapter plate and drive housing (gear unit) and
ð adapter plate and motor
ð with a surface seal adhesive (e.g. Loctite® 573 or 574).
• For further information please contact our customer service.
Clean the following components with a clean, lint-free cloth and a grease-dissolving, non-aggressive
cleaning agent:
• all surfaces in contact with adjacent components
• Centering
• the motor shaft
• the internal diameter of the socket
• the spacer sleeve inside and outside
In addition, check the contact surfaces for damage and foreign particles.
16 Version: 1.6 AG2210