Table of Contents
Advertisement
9.3
Troubleshooting
Changed operating behavior
A change in operating behavior may indicate existing damage of the gear unit or result in
damage to the gear unit.
Attention
• Do not recommission the gear unit until the fault has been rectified.
Personal injuries
Troubleshooting may only be performed by trained personnel.
CAUTION
Error
Increased operating temperature
Increased operating noises
Lubricant loss
AG2210
Possible cause
The gear unit is not suitable for the
purpose.
Motor heats up the gear unit.
Ambient temperature too high.
Distorted motor mounting
Bearing damage
Gear tooth damage
Toothed belt tension too high
Lubricant quantity too high
Leaks
Version: 1.6
Commissioning
Remedy
Check the technical data.
Check the wiring of the motor.
Ensure adequate cooling.
Change the motor.
Ensure adequate cooling.
Contact our service department.
Wipe off the leaking lubricant and
continue to monitor the gear unit.
Lubricant discharge should stop
after a short time.
Contact our service department.
33
Advertisement
Table of Contents
