Figure 35. Installing a 2.5-inch drive into the 3.5-inch drive adapter
Next steps
1.
Replace a 3.5-inch adapter into the 3.5-inch drive carrier.
2. Follow the procedure listed in
Removing a 3.5-inch drive adapter from a 3.5-inch drive
carrier
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the 3.5-inch drive carrier from the system.
Steps
1. Remove the screws from the rails on the drive carrier.
2. Lift the 3.5 inch drive adapter out of the drive carrier.
After working inside your
system.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
59