Table of Contents
Advertisement
Figure 21. Installing caster wheels
Next steps
1. Follow the procedure listed in
System cover
Removing the system cover
Prerequisites
1. Follow the safety guidelines listed in
2. Power off the system and all attached peripherals.
3. Disconnect the system from the electrical outlet and disconnect the peripherals.
4. Place the system on a flat, stable surface.
5.
Remove the front bezel.
Steps
1. Use a 1/4-inch flat head or a Phillips #2 screwdriver to turn the cover release latch counterclockwise to the unlock position.
2. Press the cover release latch, and remove the system cover.
46
Installing and removing system components
After working inside your
system.
Safety
instructions.
Advertisement
Table of Contents
