Table of Contents
Advertisement
•
Key to the bezel lock
The key is required only if your system includes a bezel.
•
Phillips #1 screwdriver
•
Phillips #2 screwdriver
•
5mm hex nut screwdriver
•
Plastic scribe
•
Wrist grounding strap connected to the ground
•
ESD mat
Front bezel
Removing the front bezel
Prerequisites
1. Follow the safety guidelines listed in
2. Keep the bezel key handy.
Steps
1. Unlock the bezel.
2. Press the blue release latch at the top of the bezel to release the bezel from the system.
3. Unhook the bezel tabs from the slots at the bottom, and lift the bezel.
Figure 17. Removing the front bezel
Next steps
1.
Replace the front bezel.
Installing the front bezel
Prerequisites
1. Follow the safety guidelines listed in
Safety
instructions.
Safety
instructions.
Installing and removing system components
41
Advertisement
Table of Contents
