Table of Contents
Advertisement
Figure 36. Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
Next steps
Replace a 3.5-inch adapter into a 3.5-inch drive carrier.
Installing a 3.5-inch adapter into a 3.5-inch drive carrier
Prerequisites
Follow the safety guidelines listed in
Steps
1. Insert the 3.5 inch drive adapter into the drive carrier with the connector end of the drive toward the back of the drive carrier.
2. Align the screw holes on the drive with the holes on the drive carrier.
3. Install the screws to secure the drive to the drive carrier.
Figure 37. Installing a 3.5-inch drive adapter into the 3.5-inch drive carrier
60
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
