Installing The Control Panel Assembly - Dell 7CX5T Installation And Service Manual

Installing the control panel assembly

Prerequisites
Follow the safety guidelines listed in
Steps
1. Replace the blank information tag in the new control panel with the information tag retained from the old control panel.
Figure 108. Installing the information tag
2. To install the information tag, push the information tag into the control-panel slot.
3. Connect the control panel cable and the control panel USB cable to the control panel assembly.
4. Align and insert the control panel into the control panel slot in the chassis.
5. Secure the control panel to the chassis by using the screw.
6. Connect the control panel cable and the control panel USB cable to the system board.
Figure 109. Installing the control panel assembly
Safety instructions on page 65.
Installing and removing system components 149