Installing The Control Panel Assembly - Dell EMC PowerEdge T350 3RRTM Installation And Service Manual

5. To remove control panel assembly:
a. Using a Phillips 2 screwdriver, remove the screws that secure the control panel assembly to the cage.
b. Slide out and remove the control panel assembly from the cage.
Figure 97. Removing the control panel assembly
Next steps
1. Replace the control panel

Installing the control panel assembly

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the front bezel.
Steps
1. To install control panel assembly:
a. Align and slide the control panel assembly into the control panel cage.
b. Using a Phillips 2 screwdriver, tighten the screws that secure the control panel assembly to the cage.
108 Installing and removing system components
assembly.
Safety instructions.
Before working inside your system.