Table of Contents
Advertisement
Figure 46. Installing the system cover
Next steps
1. Place the system upright on its feet on a flat and stable surface.
2. If removed,
install the front
3. Reconnect the peripherals and connect the system to the electrical outlet.
4. Turn on the system, including all attached peripherals.
Inside the system
NOTE:
Components that are hot swappable are marked orange and touch points on the components are marked blue.
1. Release latch
3. Hot-swappable fans (middle fans)
88
Installing and removing system components
bezel.
2. Drive cage
4. GPU card holder
Advertisement
Table of Contents
