Table of Contents
Advertisement
Figure 25. Removing the front bezel
Next steps
1.
Installing the front
bezel.
Installing the front bezel
Prerequisites
Follow the safety guidelines listed in
Steps
1. Locate and remove the bezel key.
NOTE:
There are two bezel keys attached to the back of the bezel.
2. Insert the bezel tabs into the slots in the chassis.
3. Press the release latch, and push the bezel toward the system until the bezel locks into place.
4. Using the key lock the bezel.
Safety instructions
on page 65.
Installing and removing system components
67
Advertisement
Table of Contents
