Installing The Control Panel Assembly - Dell E60S Installation And Service Manual

Next steps
1. Replace the control panel

Installing the control panel assembly

Prerequisites
Follow the safety guidelines listed in
Steps
1. Replace the blank information tag in the new control panel with the information tag retained from the old control panel.
2. To install the information tag, push the information tag into the control-panel slot.
3. Connect the control panel cable and the control panel USB cable to the control panel assembly.
4. Align and insert the control panel into the control panel slot in the system.
5. Secure the control panel to the system by using the screw.
6. Connect the control panel cable and the control panel USB cable to the system board.
Figure 85. Installing the control panel
assembly
Next steps
1. Follow the procedure listed in
86 Installing and removing system components
assembly.
Safety instructions.
After working inside your system.