Removing A 2.5 Inch Drive From A 3.5 Inch Drive Adapter - Dell 7CX5T Installation And Service Manual

Figure 38. Installing a 3.5 inch drive adapter into the 3.5 inch drive carrier
Next steps
1. Install the drive carrier.
2. If removed, install the front

Removing a 2.5 inch drive from a 3.5 inch drive adapter

Prerequisites
1. Follow the safety guidelines listed in
2. Remove the 3.5 inch drive adapter from the 3.5 inch drive
NOTE: A 2.5 inch drive is installed in a 3.5 inch drive adapter, which is then installed in the 3.5 inch drive carrier.
Steps
1. Using a Phillips #2 screwdriver, remove the screws from the side of the 3.5 inch drive adapter.
2. Remove the 2.5 inch drive from the 3.5 inch drive adapter.
bezel.
Safety instructions on page 65.
carrier.
Installing and removing system components 79