Installing and removing system components
The following sections contain the procedures for removing and replacing system components.
Topics:
•
Safety instructions
•
Before working inside your system
•
After working inside your system
•
Optional front bezel
•
System feet
•
Caster wheels – optional
•
Drives
•
Power supply units
•
System cover
•
Inside the system
•
Air shroud
•
Cooling fans
•
Cooling fan (middle fan) assembly
•
Flex bays
•
Optical drives and tape drives
•
NVDIMM-N battery
•
System memory
•
Processors and heat sinks
•
Expansion card holder
•
GPU card holder (optional)
•
Expansion cards
•
M.2 SSD module
•
Optional MicroSD or vFlash card
•
Optional IDSDM or vFlash module
•
Backplane
•
Backplane cabling
•
Integrated storage controller card
•
System battery
•
Optional internal USB memory key
•
Control panel assembly
•
Trusted Platform Module
•
System board
•
Power interposer boards
•
Converting the system from tower mode to rack mode
Safety instructions
NOTE:
Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system
by yourself.
WARNING:
Opening or removing the system cover while the system is powered on may expose you to a risk of electric
shock.
CAUTION:
Do not operate the system without the cover for a duration exceeding five minutes. Operating the system
without the system cover can result in component damage.
Installing and removing system components
5
65