Table of Contents
Advertisement
Figure 95. Removing a backplane
Next steps
1.
Install a
backplane.
Installing a backplane
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
1. Use the hooks at the base of the system as guides to align the hard drive backplane.
2. Lower the hard-drive backplane into the system till the release pin locks in place, securing the hard drive backplane to the system.
3. Connect the data, signal, and power cables to the backplane.
140
Installing and removing system components
Safety instructions
on page 65.
Before working inside your system
on page 66.
Advertisement
Table of Contents
