MacDon M155 Unloading And Assembly Instructions page 59

1. Attach chains or cables to the four lifting points (A) on the
lift sling, and connect the loop ends to the crane hook.
IMPORTANT:
Use cables or chains with a minimum lifting capacity of
3221 kg (7100 lb.).
2. Attach the lift sling to the four designated lifting points on
the windrower shipping frame as shown.
WARNING
To avoid injury or death from a swinging or falling load, keep all
bystanders clear when lifting. Equipment used for lifting must
exceed the maximum requirements specified in this section.
3. Lift the windrower onto the support stand (A).
4. Remove chains from shipping frame and move lift sling (B)
clear of the work area.
215015
ASSEMBLING THE WINDROWER
Figure 3.4: Shipping Frame Lifting Points
Figure 3.5: Windrower on Support Stand
33
A
A
B
Revision A