V1.92 26.03.2019
V1.91 14.12.2018
V1.9 01.10.2018
V1.8
26.03.2018
V1.7
xxx2017
V1.6
03.11.2017
V1.5
12.09.2017
New warning notice for charging batteries with different SOC.
New SDI parameter settings via serial monitor
New drive setup overview
Replace PI300 with MC300
RCM removed, no longer in production
New wiring scheme overview
Kursivstellung des englischen Textes.
SDI next generation Display description completed
Correction of nominal rpm/V load constant HPD16/32D
New Motorcontroller Version 3.x
Überführung des Dokumentes in Office 2016 Umgebung und Übersetzung
Transfer of document to new Office 2016 environment and translation
Allgemeine Korrekturen durchgeführt
General corrections performed
Entfernung des Kapitels HPD25D wegen Neuentwicklung HPD32D
Removal of chapter HPD25D because of new development HPD32D
Im Kapitel Akkus die Ansicht Parametrierung über E-Drive Studio entfernt
Ergänzungen beim Troubleshooting Akkus.
Ergänzungen zum Hibernate Modus
Hinweis zum Bedarf eines RCM beim Einsatz eines SDI.
SDI Errorcodes und ADI Fehlermeldungen in einer Liste zusammengefasst.
Ergänzungen bei den Features zum Akkupack
Parameterization view in E-Drive Studio removed from "Batteries" chapter
Additions to troubleshooting for the batteries.
Additions to the hibernate mode
Note on requirement of an RCM for using an SDI.
SDI error codes and ADI error messages summarized in a single list.
Additions to the features of the battery pack
Im Kapitel Akkus, den Hinweis zur Akkukühlung und zur Einbausituation
hinzugefügt. Technische Daten der Akkus bei den Stromentnahmen
angepasst.
Added notes on battery cooling and installation orientation to the "Batteries"
chapter. Adapted technical data of the batteries during
current drain.
Neuen Hochstromakkutyp hinzugefügt
Interfacesystem SDGI entfernt
Added new high current battery type
Interface system SDGI removed
allgemeine Korrekturen
General corrections
Hinzufügen der technischen Daten des MC300Duplex.
Addition of technical data pertaining to the MC300Duplex.
Ergänzung der Drive Setup overview S5.
Addition of the Drive Setup overview S5.
Ergänzungen beim Troubleshooting MC300.
Additions to troubleshooting for MC300.
Ergänzungen beim Troubleshooting Akku.
Additions to troubleshooting for the battery.
Ergänzungen der Grenzdrehzahlen und Schubdaten zu Propellern
Additions to the limit speeds and thrust data for propellers
Ergänzung 1,65m Propeller am HPD32D
Addition of 1.65m propeller to HPD32D
145
Need help?
Do you have a question about the HPD12 and is the answer not in the manual?