GEIGER Engineering HPD12 Handbuch Manual page 143

Scheme drive system enable/disable:
Battery is powered on
System is able for
enabling/disabling
Yes - No
Enable the Drive System
Press two seconds the
Drive System shows an error
enabling/disabling button at
the interface / alternative
switch the enabling switch on
Drive System is enabled
Drive enable is signaled
The motor is able to start with
with a beep/beep signal
the throttle command
Press short the enable button or Emergency off signal is
switch of the enabling swich connected and has released
Drive system is
disabled.
New start is
possible if failures
are reset.
143