Instructions for Use
Surgical Laser Unit Limax
6.1.5
SMAplus Fiber Connecting Socket
SMAplus laser fiber connecting socket
with connected laser fiber
6.1.6
Luer-Lock Socket for AIR (Purge Air)
Luer-lock socket on Limax
V. 1.0
®
60
The fiber connecting socket (Fig. 6.1, (4)) serves to
connect laser fibers featuring an SMAplus plug.
The fiber plug is constantly monitored for correct
connection.
Only when a laser fiber has been correctly connected can
the unit be switched to LASER READY.
The Luer-lock socket (Fig. 6.1, (5)) is located next to
the SMAplus laser fiber connecting socket.
It is to be used for connecting the sterile air filter
(see also section 6.7.1 "Connecting the Sterile Air
Filter", page 51).
NOTE
The purge air emitted from the Luer-Lock socket may
only be used for purging laser application parts.
®
60
41