Table of Contents
Advertisement
6.16.7
Date & Time
Press rotary switch axially
— This highlights the field in blue and activates it for adjustment.
Adjust the numerical value by rotating the rotary switch.
Select the DST field and activate it by pushing the rotary switch, then turn switch to select
"off" or "on" as appropriate. This changes the hour value automatically.
Confirm the new value by pressing the rotary switch.
< Back terminates the process and activates the new setting.
The date / time format is predetermined by the selected interactive language.
English:
Other languages:
72
11-19-2013 01:20 p.m.
19.11.2013 13:20
Setup / Date & Time
As date and time are used as logfile entries for
the recorded laser applications, it is necessary
to keep both settings current.
Following selection of Date & Time, the dialog
Set date / time is displayed. It allows you to
adjust the date and time values:
Rotate the rotary switch to highlight a field.
Instructions for Use
Surgical Laser Unit Limax
®
60
V. 1.0
Advertisement
Table of Contents
