Key Switch; Emergency Stop; Sma-X Fiber Connection Socket - KLS Martin group Laser Surgical Unit diomax 1550 Instructions For Use Manual

Instructions for Use
Laser Surgical Unit diomax
5.1.1

Key Switch

NOTICE
The key switch fully disconnects the device from the grid!
5.1.2

EMERGENCY STOP

5.1.3

SMA-X Fiber Connection Socket

Revision 2
®
1550
The device can be switched on and off using the key
switch.
Key position 0: Device switched off
Key position 1: Device switched on
The key can be removed only in position 0.
EMERGENCY-STOP Switch
This switch interrupts the power supply to the device and
immediately stops the emission of laser light.
• Press EMERGENCY-STOP switch.
— The switch locks in place.
The device can be switched on again after pulling out
•
the switch.
The SMA-X fiber connection socket
is used to connect laser fibers with the SMA-X plug. The
fiber plug is electronically monitored with its position.
The device can be switched into LASER READY status only
when a laser fiber is connected.
31