Table of Contents
Advertisement
TRENDnet User's Guide
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
IP DiffServ (DSCP)
Advanced Settings > Bandwidth Control > IP DiffServ (DSCP)
Parameter
Description
"Tag Over DSCP" or "DSCP Over Tag". "Tag Over DSCP" means the 802.1p
Mode
tag has higher priority than DSCP.
© Copyright 2018 TRENDnet. All Rights Reserved.
This field displays each priority level. The values range from 0 (lowest
Priority
priority) to 7 (highest priority).
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
Priority/Queue Mapping
Advanced Settings > Bandwidth Control > Priority/Queue Mapping
Parameter
Description
Click this button to reset the priority to queue mappings to the
Reset to Default
defaults.
This field displays each priority level. The values range from 0
Priority
(lowest priority) to 7 (highest priority).
Queue ID
Select the number of a queue for packets with the priority level.
Managed Industrial L2 Switch
48
Advertisement
Table of Contents
