TRENDnet User's Guide
Management
•
HTTP web based GUI
•
CLI: Telnet / SSHv2
•
SNMP v1, v2c, v3
•
SNMP trap (up to 5 receivers)
•
RMON groups 1/2/3/9
•
Device configuration backup & restore, upgrade firmware, reboot, and reset to
default
•
Multiple administrative or read-only user accounts
•
Enable or disable power saving mode per port
•
Static MAC entries
•
LLDP (Link layer discovery protocol)
•
Netlite device map
•
ONVIF device discovery
•
SNTP
•
SMTP alert
•
Syslog
•
Port statistics/utilization
•
Traffic monitor
•
Port mirror: one to one, many to one
•
Storm control: Broadcast, multicast, destination lookup failure (Min. limit:
1pps)
•
Loopback detection
•
DHCP relay/option 82
•
SFP DDMI (Digital Diagnostic Monitoring Interface)
Access Control
•
802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
•
DHCP snooping/screening
•
Trusted host/IP access list for management access
•
Port Security/MAC address learning restriction (Up to 100 entries per port)
•
Static/dynamic ARP inspection
© Copyright 2018 TRENDnet. All Rights Reserved.
ACL
•
Source/Destination MAC address
•
Source/Destination IP address
•
Source Interface
•
VLAN ID
•
EtherType
•
TCP/UDP port 1-65535
Special Features
•
Netlite device discovery and map display in GUI
•
Port security: MAC address learning restriction per port
•
DHCP relay/option 82 & DHCP server snooping/screening support
•
Wide operating temperature range
•
Dual redundant power inputs
•
Alarm relay triggered by power failure
•
Surge and ESD protection
Power
•
PWR (Primary) terminal input: 20 – 60V DC
•
RPS (Redundant) terminal input: 20 – 60V DC
•
Compatible power supply: TI-M6024 (60W), TI-S12024 (120W), TI-S12048
(120W), TI-S24048 (240W) sold separately
•
Max. Consumption: 12W
Terminal Block
•
Redundant power inputs, alarm relay contact, 6 pin
•
Wire range: 0.5 mm^2 to 2.5 mm^2
•
Solid wire (AWG): 12-26
•
Stranded wire (AWG): 12-26
•
Wire strip length: 10-11mm
Managed Industrial L2 Switch
152