Table of Contents
Advertisement
TRENDnet User's Guide
VLAN
This field displays the source VLAN ID in the MAC address filter.
Port
This field displays the source port of the discarded ARP packet.
This field displays how long (in minutes) the MAC address filter
Expiry (min)
remains in the Switch.
Action
Click Delete to remove the record manually.
This field displays the current number of MAC address filters
Total
that were created because the Switch identified unauthorized
ARP packets.
Access Control List (ACL)
L2 Access control list (ACL) is a list of permissions attached to an object. The list
specifies who or what is allowed to access the object and what operations are allowed
to be performed on the object.
L2 ACL function allows user to configure a few rules to reject packets from the specific
ingress ports or all ports. These rules will check the packets' source MAC address and
destination MAC address. If packets match these rules, the system will do the actions
"deny". "deny" means rejecting these packets.
The Action Resolution engine collects the information (action and metering results)
from the hit entries: if more than one rule matches, the actions and meter/counters are
taken from the policy associated with the matched rule with highest priority.
L2 ACL Support:
1. Filter a specific source MAC address.
Command: source mac host MACADDR
2. Filter a specific destination MAC address.
Command: destination mac host MACADDR
3. Filter a range of source MAC address.
Command: source mac MACADDR MACADDR
The second MACADDR is a mask, for example: ffff.ffff.0000
© Copyright 2018 TRENDnet. All Rights Reserved.
4. Filter a range of destination MAC address.
Command: destination mac MACADDR MACADDR
The second MACADDR is a mask, for example: ffff.ffff.0000
L3 ACL Support:
1. Filter a specific source IP address.
Command: source ip host IPADDR
2. Filter a specific destination IP address.
Command: destination ip host IPADDR
3. Filter a range of source IP address.
Command: source ip IPADDR IPADDR
The second IPADDR is a mask, for example: 255.255.0.0
4. Filter a range of destination IP address.
Command: destination ip IPADDR IPADDR
L4 ACL Support:
1. Filter a UDP/TCP source port.
2. Filter a UDP/TCP destination port.
Default Settings:
Maximum profile:
Maximum profile name length:
Notices
The ACL name should be a combination of alphanumeric characters.
Managed Industrial L2 Switch
64.
16.
110
Advertisement
Table of Contents
