Table of Contents
Advertisement
TRENDnet User's Guide
Community
This field displays the community string used with this remote trap
String
station.
Action
Click Delete to remove a configured trap receiver station.
Auto Provision
Auto provision is a service that service provider can quickly, easily and automatically
configure remote device or doing firmware upgrade at remote side.
1. When the Auto Provision is enabled, the Switch will download the auto provision
information file from the auto provision server first.
The file name is followed below naming rule:
Model_Name_Autoprovision.txt
For Example:
SWITCH_Autoprovision.txt
The contents of the file are listed below:
AUTO_PROVISION_VER=1
Firmware_Upgrade_State=1
Firmware_Version=8648P-999-1.1.0.S0
Firmware_Image_File=8648P-999-1.1.0.S0.fw
Firmware_Reboot=1
Global_Configuration_State=0
Global_Configuration_File=8648P-999-1.1.0.S0.save
Global_Configuration_Reboot=0
Specific_Configuration_State=0
Specific_Configuration_Reboot=0
2.
If AUTO_PROVISION_VER is biggest than current auto provision version, do step 3;
otherwise, wait 24 hours and go back to step 1.
© Copyright 2018 TRENDnet. All Rights Reserved.
3.
If the Firmware_Upgrade_State =1, do step 4; otherwise, do step 6.
4.
If the Firmware_Version is difference than current firmware version, download the
Firmware_Image_File and upgrade firmware.
5.
If upgrade firmware succeeded and Firmware_Reboot=1, let reboot_flag=1.
6.
If the Global_Configuration_State =1, download the Global_Configuration_File and
upgrade configuration; otherwise, do step 8.
7.
If upgrade configutation succeeded and Global_Configuration_Reboot =1, let
reboot_flag=1.
8.
If the Specific_Configuration_State =1, download the specific configuration file and
upgrade configuration; otherwise do step 10. The naming is "Model_Name _" with
12-bit MAC digits ,example for following is "INS-8648P_00e04c8196b9.txt"
9.
If upgrade configutation succeeded and Specific_Configuration_Reboot =1, let
reboot_flag=1.
10. If reboot_flag=1, save running configuration and reboot the switch; otherwise, wait
24 hours and go back to step 1.
Default Settings
Auto provision configuration profile:
Active:
Version:
Protocol:
FTP user/pwd:
Folder:
Server address:
Managed Industrial L2 Switch
Disable
0
FTP
/
129
Advertisement
Table of Contents
