TRENDnet TI-RP262i User Manual page 140

TRENDnet User's Guide
⚫
admin - read / write.
⚫
normal - read only.
; Cannot enter the privileged mode in CLI.
; Cannot apply any configurations in web.
The Switch also supports backdoor user account. In case of that user forgot their user
name or password, the Switch can generate a backdoor account with the system's MAC.
Users can use the new user account to enter the Switch and then create a new user
account.
Default Settings
Maximum user account
Maximum user name length
Maximum password length
Default user account for privileged mode
Notices
The Switch allows users to create up to 6 user account.
The user name and the password should be the combination of the digit or the
alphabet.
The last admin user account cannot be deleted.
The maximum length of the username and password is 32 characters.
CLI Configuration
Node Command
enable show user account
configure add user USER_ACCOUNT
PASSWORD
(normal|admin)
configure delete user
USER_ACCOUNT
© Copyright 2018 TRENDnet. All Rights Reserved.
: 6.
: 32.
: 32.
: admin / admin.
Description
This command displays the current user
accounts.
This command adds a new user account.
This command deletes a present user
account.
Example:
[DEVICE_NAME]#configure terminal
[DEVICE_NAME](config)#add user q q admin
[DEVICE_NAME](config)#add user 1 1 normal
Web Configuration
Management > User Account
Parameter Description
User Name Type a new username or modify an existing one.
Type a new password or modify an existing one. Enter up to 32
User Password
alphanumeric or digit characters.
Select with which group the user associates: admin (read and
User Authority
write) or normal (read only) for this user account.
Apply Click Apply to add/modify the user account.
Refresh Click Refresh to begin configuring this screen afresh.
User Account List
No. This field displays the index number of an entry.
User Name This field displays the name of a user account.
User This field displays the password.
Managed Industrial L2 Switch
137