Table of Contents
Advertisement
TRENDnet User's Guide
System Information
CLI Configuration
Node
Command
enable
show hostname
enable
show interface eth0
enable
show model
enable
show running-config
enable
show system-info
enable
show uptime
Web Configuration
System Status > System Information
© Copyright 2018 TRENDnet. All Rights Reserved.
Description
This command displays the system's network
name.
This command displays the current Eth0
configurations.
This command displays the system information.
This command displays the current operating
configurations.
This command displays the system's CPU loading
and memory information.
This command displays the system up time.
Parameter
Description
Model Name
This field displays the model name of the Switch.
Host Name
This field displays the name of the Switch.
Boot Code Version
This field displays the boot code version.
Firmware Version
This field displays the firmware version.
Built Date
This field displays the built date of the firmware.
This field displays whether the DHCP client is enabled on the
DHCP Client
Switch.
IP Address
This field indicates the IP address of the Switch.
Subnet Mask
This field indicates the subnet mask of the Switch.
Default Gateway
This field indicates the default gateway of the Switch.
This field displays the MAC (Media Access Control) address of the
MAC Address
Switch.
The serial number assigned by manufacture for identification of
Serial Number
the unit.
Management
This field displays the VLAN ID that is used for the Switch
VLAN
management purposes.
CPU Loading
This field displays the percentage of your Switch's system load.
This field displays the total memory the Switch has and the
Memory
memory which is currently available (Free) and occupied
Information
(Usage).
This field displays current date (yyyy-mm-dd) and time
Current Time
(hh:mm:ss).
Refresh
Click this to update the information in this screen.
Managed Industrial L2 Switch
27
Advertisement
Table of Contents
