Furuno FAR-2228-BB Operator's Manual page 114

1. OPERATIONAL OVERVIEW
• Radar functions are controlled independently, dependently or commonly depending
on selection as [MASTER] or [SLAVE] (see the following table).
Radar Functions
AIS function
Brilliance
Echo trails
EBL
Lat/long data
Presentation mode
Speed data
Target alarm
TT, AIS on/off
TT, AIS track interval
Vector mode
Vector time
VRM
Wiper
Zoom
TT COLLISION
alarm
3
Range*
A/C SEA*
A/C RAIN*
Automatic Clutter
Elimination (ACE)*
1
Gain*
2
IR*
Echo stretch*
Echo averaging*
Picture setting*
(Customize echo)
STBY/TX
Tuning
Reference Point
TT LOST warning
TT alerts ACK
TT acquire
TT/AIS AZ
1
* : When the connected radar is a FAR-2xx8/FAR-3xx0 series radar, these items can
be adjusted from the "Slave" radar.
2
* : When the connected radar antenna is a FAR-3xx0/FAR-2xx8 series magnetron-
type, and the radar is assigned as "Slave", the desired value can be set for these func-
tions. For FAR-3xx0/FAR-2xx8 series SSD-types, these functions cannot be con-
trolled.
3
* : The desired value can be set when the radar is assigned as "Slave", however the
maximum displayable range is dependent on the setting at the "Master" radar.
1-92
Control
Independent Desired value can be set Desired value can be
1 Dependent
Control
1
1
1
1
1
Independent
Common
Control
Master Display Option Slave Display Option
Item Commonly Con-
trolled
set
Cannot control
Desired value can be
set
Item Commonly Con-
trolled