How To Use The Information Box - Furuno FAR-2228-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.47

How to Use the Information Box

The information box shows target data, navigational data and zoomed areas of the ra-
dar display. To set up the information box, do the following:
1. Open the menu.
2. Select [7 INFORMATION BOX].
3. Select and set the appropriate menu item, referring to the table below.
4. Close the menu.
Menu item
[2 OWN SHIP INFO]
[3 DISPLAY NAV DATA]
[4 NAV DATA SETTINGS] See section 1.46
[5 ZOOM]
[6 ZOOM DISPLAY]
[7 TARGET DATA]
1-88
Settings
See section 1.11, Set up various own ship information,
section 1.12 and such as sensors used for position fix,
section 1.13 for date and time format/offsets, heading
details. and speed sensors used.
• [OFF] • Disable navigational data display.
• [ON] • Enable navigational data display.
Set up the format in which various
for details. navigational data is displayed in the
[INFORMATION BOX].
• [OFF] • Disable zoom magnification.
• [2TIMES] • Set zoom magnification at 2 .
• [3TIMES] • Set zoom magnification at 3 .
• [STAB GND] • Ground stabilized zoom (Geo-
• [STAB HDG] • Heading stabilized zoom (Rela-
• [STAB NORTH]
• [TT TRACK] • North stabilized zoom (True).
• Tracked targets are zoomed.
• [1BOX] See the figure on the following page.
• [2BOX]
• [3BOX]
• [LARGE]
Description
graphically fixed).
tive).