Furuno FAR-2228-BB Operator's Manual page 18

SYSTEM CONFIGURATION
IMO-type radar(s) must be interconnected to the following type approved sensors.
For other radar types, it is recommended to connect the following type approved sensors.
• EPFS meeting the requirements of the IMO resolution MSC.112(73).
• Gyrocompass (or equivalent devices) meeting the requirements of the IMO resolution A.424(XI).
• SDME meeting the requirements of IMO resolution MSC.96(72).
The radar may be interconnected via HUB-3000 to other FURUNO processing units having
approved LAN ports.
Note: Basic configuration is shown with a solid line. For footnotes, see "Notes" on page xx.
X-band (TR-UP)
for FAR-2228-NXT(-BB)/2328-NXT, 600 W
(w/ Performance Monitor PM-32B*
Sub monitor
100-115/220-230 VAC
1ø, 50-60 Hz (for de-icer)
RCU-014 or RCU-015
Control Unit RCU-016
100-230 VAC
100-230 VAC
Sensors
(IEC61162-450 format)
100-230 VAC
VDR
(IEC61162-450 format)
100-230 VAC
VDR (Analog RGB)
100-230 VAC 1ø, 50-60 Hz
440 VAC 1ø, 50-60 Hz
24 VDC
100/110/120 VAC
1ø, 50-60 Hz
xvi
NOTICE
7 )
XN12CF-RSB128-123
XN20CF-RSB128-123
XN24CF-RSB128-123
Control Unit
3
Monitor Unit*
MU-190 or
MU-231 or
MU-270W
Intelligent Hub
HUB-3000* 5
Switching Hub
HUB-100
OR
Intelligent Hub
6
HUB-3000*
Transformer
Rectifier
PR-850A
for FAR-2218(-BB)/2318, 12 kW
(w/ Performance Monitor PM-32A
XN12CF-RSB128-105
XN20CF-RSB128-105
XN24CF-RSB128-105
for FAR-2228(-BB)/2328, 25 kW
Antenna Unit
(w/ Performance Monitor PM-32A
XN12CF-RSB128-106
XN20CF-RSB128-106
XN24CF-RSB128-106
Antenna
10
Cable*
Gyrocompass*
Gyrocompass*
AIS Transponder
EPFS*
SDME (Speed log)
Processor
AMS (IEC61162 format)
Unit
RPU-025
ECDIS
AMS (Contact)*
Sub monitor 1 of ECDIS*
For AC
power
Sub monitor 2 of ECDIS*
or
USB Mouse
For DC
12
power*
USB Device*
*7 )
*7
)
: Standard supply
: Optional or local supply
1
(AD-10 format)
1 (IEC61162 format)
2
(GPS)
4
8
8
9