Furuno FAR-2228-BB Operator's Manual page 15

• All functions can be accessed using only the trackball unit, however, RCU-016 trackball units
do not have a power button.
• TT, AIS, Radar Map, Interswitch and FURUNO's unique Target Analyzer are supplied as stan-
dard.
• CPA/TCPA alarms.
• Targets activate the user-set alarm zone when entering or exiting the zone.
• The Target Analyzer function helps to find targets in high noise areas (rain/snow), or where
there is interference from surface reflections. (Available for B/W-types only.)
• The FAR-2xx8 series complies with MED 2014/90/EU and also the following directives:
IEC62388, IEC 62288, IMO MSC. 192(79).
Terminology standards used in this manual
This manual uses the following terminology standards:
Terminology
Select
Left-click
Right-click
Control Unit
Open the menu.
Close the menu.
For the sake of brevity, all procedures in this manual use the terms "Open the menu." and "Close
the menu".
Program numbers
Please access the following URL if you need software information:
http://www.furuno.com/en/merchant/radar/FAR-22x8_23x8/#SoftwareVersion
System Program no.
Antenna unit (common to all antennas)
SPU 0359281
SPU 0359286
SPU 0359477
MTR-DRV 0359293
PM 0359296
RF-Converter 0359302
RF-Converter 0359414
Processor Unit: RPU-025
MAIN 0359377
SUB 0359380
Control Unit: RCU-014/015/016
KEY 0359385
: Denotes minor changes to the software.
• Use the trackball or scrollwheel on the control unit to move the cursor over
the item to be "selected", then left-click.
• With a menu open: Press the appropriate menu number.
Press the left mouse button.
Press the right mouse button.
Refers to the RCU-014 Control Unit, unless otherwise specified.
Press the MENU key to show the [MENU].
Press the MENU key to close the [MENU].
Version no.
01.
01.
01.
01.
01.
01.
01.
01.
01.
01.
Meaning or usage example
Remarks
For magnetron radar
For S-band solid state radar
For X-band solid state radar
For S-band solid state radar
For X-band solid state radar
FOREWORD
xiii