Single Level Installation - ATEN CL5716I User Manual

CL5708I / CL5716I User Manual

Single Level Installation

In a single level installation, there are no additional switches daisy chained
from the first unit. To set up a single level installation, refer to the installation
instructions and diagrams on the following pages (the numbers in the diagrams
correspond to the numbers of the installation steps).
1. Use the grounding wire to connect the switch's grounding terminal to a
suitable grounded object.
2. Plug an Ethernet cable from the network into the LAN port.
3. (Optional) Use the console cable provided with the package to connect a
keyboard, monitor, and mouse to the Console Port. See Cabling
Diagrams, page 18.
Note: The maximum distance between the switch and a computer is 10 m.
4. For each of the computers you are installing, use a KVM cable set to
connect a KVM port to the computer's keyboard, video and mouse ports.
See KVM Cable Installation Diagrams, page 18.
Note: The maximum distance between the switch and a computer is 10 m.
5. Plug the power cord into the CL5708I / CL5716I power socket and into a
AC power source.
6. Power on the CL5708I / CL5716I.
7. After the CL5708I / CL5716I is powered on, power on the computers.
See Powering Off and Restarting, page 24 for details.
16